Morris Minor on the farm

Sowing Seeds of Hope | Youth Work & Faith in Cornwall

Cultivating Purpose, Community, and Faith on the Cornish Coast

Is Hammerite a good option for Rosie the Morris Minor

In short, while Hammerite and Smoothrite (which is a type of Hammerite paint) are excellent for protection, for a lasting repair, particularly on a classic car bodywork, you should consider a dedicated rust treatment first.

Hammerite / Smoothrite (Direct to Rust Paint)

Hammerite Direct to Rust paints are formulated with anti-corrosion pigments and claim to be a 3-in-1 solution (primer, undercoat, and topcoat).

    Will it treat the rust? Hammerite’s “Direct to Rust” formula contains inhibitors that aim to stop the rust spreading, and it can be applied directly over surface rust. However, it does not chemically convert the rust in the same way a dedicated rust converter does.

    It is best for Minor cosmetic issues, small patches of surface rust, or areas where flexibility is not critical (like garden gates). It’s a quick fix for visible areas or a tough topcoat for less-seen parts.

    Many classic car restorers (including those discussing Minors) advise against using Hammerite as the main rust solution for anything more than minor surface rust on panels. Because it dries hard, it can crack if the metal flexes (which a car body does), potentially trapping moisture underneath and allowing the rust to continue out of sight.

    Dedicated Rust Treatment

    (e.g., Kurust) + Primer + Top Coat (Recommended)

    This is the consensus best practice for ensuring the repair on Rosie lasts, particularly on bodywork or important structural areas.

      This is the most important step. Remove all loose rust and flaking paint with a wire brush, sandpaper, or an abrasive wheel. Get down to bare, solid metal where possible. Clean and degrease the area.

      Products like Hammerite Kurust (or Bilt Hamber Hydrate 80, Fertan, etc.) contain chemicals (often phosphoric acid-based) that react with the rust (iron oxide) and chemically convert it into a stable, black or blue/black inert compound (like iron phosphate). This stable layer is an excellent base.

      Once the Kurust has reacted and dried (usually a few hours), you should apply a good quality automotive primer. A zinc-rich primer is often recommended for maximum corrosion protection, as the zinc acts as a sacrificial barrier.

      Finish with your chosen top coat in the correct colour for Rosie.

      Will the paint treat the rust? No, the Kurust treats the rust by converting it into a stable compound. The primer protects the treated surface and provides the key for the top coat. The top coat provides the final colour and weather barrier.

      For the best, most durable result on Rosie, I am going to use the dedicated rust treatment, primer, and top coat approach. It takes more time and effort on the preparation, but it ensures you are converting the rust to an inert state rather than just covering it up.

      Classic car are lovely and giving them the proper treatment will keep Rosie looking splendid for many years to come!


      Comments

      Leave a Reply

      Your email address will not be published. Required fields are marked *